Puertas del calentador de agua para vehículos recreativos suburbanos

Filtrar:

Precio
El precio más alto es $69.99 Restablecer
$
$
Tipo de producto
0 seleccionados Restablecer
Marca
0 seleccionados Restablecer

18 productos

On a Suburban water heater, the access door is the exterior panel covering the burner, gas valve, and controls. Once it cracks, fades, or loses its latch, water and insects reach the burner tube, which tends to show up later as ignition trouble.

Three things determine the right Suburban door. Capacity first: 6 gallon doors and 10, 12, and 16 gallon doors are not interchangeable, and the ST-42 and ST-60 tankless units use their own panel. Mounting style next. Standard doors sit roughly a quarter inch proud of the sidewall and install without bending flanges, while flush mount doors sit tight against the wall for a cleaner look and better water resistance. Finally, series: SW tanks and SAW Advantage tanks take different doors.

We stock Suburban doors in white and black, plus Advantage Series panels for Atwood retrofits and replacement door screens.

What is an RV water heater access door and when does it need replacing?

The access door is the exterior panel that covers your Suburban water heater tank, burner assembly, and gas valve. Replace it when the door cracks, the latch fails, the seal degrades, or UV exposure has faded and warped the panel enough to let water intrude behind the unit. A clean seal also keeps wasps and debris out of the burner tube, which protects ignition performance.

How do I know which Suburban water heater door fits my unit?

Match the door to your water heater's gallon size and model series. Suburban model numbers decode as SW=Suburban Water Heater, the number=gallon tank capacity (6, 10, 12, 16), and the suffix indicates ignition type (D=DSI, P=Pilot). A door sized for an SW6D will not fit an SW10DE. Measure the cutout in your RV's sidewall (height x width) and confirm against the door's listed dimensions before ordering. If you have a 10-gallon unit, you can also browse our 10 Gallon RV Water Heater collection for tank replacements and matching components.

What colors and finishes are available?

Suburban access doors are produced in polar white, colonial white, and black. Color names vary by RV manufacturer, so the closest visual match is usually polar white for newer rigs and colonial white for older units. Painting a door to match your sidewall is possible with a plastic-adhesion primer followed by automotive-grade exterior paint.

Can I install a Suburban water heater door myself?

Yes. Most installations take 20 to 30 minutes with a Phillips screwdriver. Remove the old door's mounting screws, transfer or replace the hinge and latch hardware, set the new door into the sidewall cutout, and reseal the perimeter with a non-hardening RV-grade butyl tape or sealant to prevent water intrusion. While you have the bay open, it is a good time to inspect the anode rod and check the T&P valve. For off-season storage, pair the new door with our RV Winterizing Kits to protect the tank from freeze damage.

Do you carry other Suburban water heater parts?

Yes. Beyond access doors, we stock burner assemblies, gas valves, circuit boards, thermostats, T&P relief valves, anode rods, and drain plugs for the SW6D, SW6DE, SW10D, SW10DE, SW12DE, and SW16DE series. Text or call 817-984-1852 if you need help confirming the right part number for your unit.

How is shipping handled on water heater doors?

Access doors ship via standard ground freight and typically arrive within 3 to 7 business days. Orders over $100 ship free within the contiguous US. Inspect the carton on delivery and report any cracks or impact damage within 48 hours so we can file a carrier claim and send a replacement.